All hydraulic means easy maintenance, no downtime, and the most efficient use of your horsepower to get the job done. Moreover, weight, balance, stability, and tine speed allow this tiller to work where others can’t. In addition, the open design allows for easy access to the hydraulics when maintaining or repairing. The heavy design means your tiller works for you instead of tossing you around. As a result, counter-rotating tines break up the most difficult soil, clay, or sod. The tine drive motor is directly mounted to the tine shaft, resulting in a system so durable the original tiller was rented out for more than 20 years. The wheel drive and tine drive work independently of each other to allow your tilling travel speed to be adjusted to the soil conditions.
Compost Spreader,24 In.x18 In.
The gold standard in the golf, sports turf, rental and landscape industries for over 75 years, the Jr. Sod Cutter packs the long-lasting durability and dependable performance you expect from us. More user-friendly than ever before, this workhorse embodies our honest commitment to pushing forth innovations that help you get the job done—and get it done right—for years to come.
The True Temper 24-inch Clog Free rake features an innovative, patented head design that prevents leaves from being clogged or speared by the rake head tines. This rake is good for raking large quantity of leaves and other yard waste quickly and efficiently.
The SC70TX can fit into tight spaces in a residential area. The track system is designed to decrease ground disturbance. The SC70TX is equipped with safety features such as the patented capacitance-sensing operator presence system and wheel brake to help you feel confident on the job.
FEATURES & BENEFITS
Operator presence system
The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
Ground drive speed
The ground drive speed helps transport the machine between stumps to increase productivity on the job.
SmartSweep™ control system
The SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.
Gearbox drive cutter wheel system
Gearbox drive cutter wheel system directs the maximum amount of horsepower to the cutter wheel for optimal jobsite productivity.
Features
Proudly Made in the U.S.A. with Global Materials in Tupelo, Mississippi
Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2" wide and brush 6’ tall - all at a rate of just under an acre of brush per hour.
The BC26 has a 26" wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes and Briggs engine version handles up to 15-degree slopes.)
This 24-In. Front Tine Tiller powers through tough dirt and soil to perfectly prepare seed beds. Powered by a 208cc OHV engine and heavy-duty chain drive transmission, this tiller tackles any job with power and ease. Its four forward rotating 12-In. steel tines are designed to boost the cultivating process providing reliability and premium performance. Equipped with an adjustable tilling width and depth stake makes it great for any garden or flower bed.
Step up to the Classen PRO Stand-Aer® Aerator. Three times faster than a walk-behind aerator and the best Quality of Core® in the aeration industry. The Stand-Aer pulls 10% more cores than the nearest competitive stand-on aerator.
Give your garden the attention it deserves with this 16-In. Rear Tine Tiller. The powerful 208cc engine breaks through tough soil with the help of its aluminum encased gear-drive transmission. An adjustable depth stake and 16-In. tilling width is suited for a wide array of applications. Its 4 counter rotating 10-In. steel tines will give you the power you need to muscle through any garden or tough landscape leaving the soil well tilled and aerated. The padded loop style handle gives you extra comfort and control.
Simplify tough, high cuts with the Extendable Pole Saw & Pruner, which includes two different cutting options and extends up to 12 feet. A unique double locking system ensures the pole stays extended for superior control. Plus, an easy-to-handle, lightweight pole makes reaching lofty limbs easier. Trim branches up to 1" thick with the sharp, durable steel pruner boasting a special low-friction coating. For thicker branches, call on the power of the 12" double-grind saw.
Ground Hog offers a large range of augers and accessories for our earthdrills to cover all types of soil conditions and customer requirements. We have augers in three different styles available from 2" to 12" in diameter for our C-71-5 Two-Man, 1M5C One-Man and HD99 Hydraulic earthdrills as well as 14", 16" and 18" Pengo style nursery/planting augers for use with the HD99.
At Ground Hog, we are leading the industry to a standard auger drive with our 7/8" square drive that we have been using for over 40 years. All of our earthdrills and augers use this style of drive and are interchangable. We also offer a variety of different auger adapters to use other brands of augers on our equipment as well as our augers on other brands of equipment. We can also build custom augers to meet specific requirements so contact us if there is something special you are looking for.
Our augers are manufactured using high quality, heavy-gauge, welded steel construction which results in an auger that is durable and therefore profitable.
The Ground Hog ModelONE is a small, hand-held, one-man auger that is designed from the ground up for Commercial and Rental use and also for a great end-user experience.
Ground Hog Inc. has been making larger earthdrills for over 70 years and when we decided to build a smaller one-man machine, we wanted it to be the best. One-man earth drills have been around a long time and they haven’t changed much. We wanted to design a high quality machine that is improved and refined in every possible way. We think we have accomplished that goal.
Ideal for humanely capturing armadillos, cats, groundhogs, muskrats, nutria, opossums, raccoons, skunks, bobcats, small dogs, small foxes, and beavers
Dimensions: 31.98 in x 10.6 in x 12.14 in
One spring-loaded solid metal door
Smoothed internal edges prevent injuries to animals
Designed for higher catch rate and fewer escapes
Made to last - Resists rust and corrosion
Comes fully assembled and ready to use
Trigger rod is located outside of the trap so animal cannot damage it while in the trap
Made in the U.S.A.
Available as 1-pack or 2-pack
This Louisville 6 foot non-conductive fiberglass step ladder has a load capacity of 300lbs, rated ANSI Type IA. This ladder is equipped with the new and innovative Raptor Top with magnet and multiple tool slots, SHOX impact absorption system, new Raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces, and double-rivet step construction. The Louisville FS1506 step ladder meets or exceeds the safety standards set by ANSI and OSHA.
FEATURES
Shox Impact Absorption System
Multifunctional Raptor Top With Multiple Tool Slots And Magnet
Raptor Boot With Slip-resistant Non-Marring Bonded Tread
Inside Spreader Braces
Double-Rivet Step Construction
Wide Back Braces
This Louisville 32 foot fiberglass extension ladder has a 300 pounds. load capacity, rated ANSI Type IA. It is equipped with the MAXLOCK rung lock, custom engineered from a patented, advanced molecular polymer, MAXLOCK is the strongest, toughest, lightest rung lock ever made. This ladder also includes the patented QuickLatch system that provides a simple, intuitive method of securing the fly and base sections of the ladder when extended. The ladder features outside slide guides, D-shaped rungs fully serrated for a slip resistant surface, non-marring rail end caps, rope and pulley and steel swivel safety shoes with metal shield to be used with the tread down or in spike position. The Louisville FE3232 fiberglass extension ladder meets or exceeds the safety standards set by ANSI and OSHA.
The T7414 Fiberglass 14ft Twin Stepladder features a duty rating of 300lb per side of the ladder. Designed for one or two-person jobs, the T7400 series ladders have heavy gauge aluminum tops and feature heavy duty internal spreaders to resist damage around the worksite or in transit. The GLAS*MARK® Violater stripes on the rails make the ladder more visible and the EDGE® bracing system and external rail shields add to the long lasting durability of these ladders. Fiberglass rails are non-conductive for working near electricity.
This Louisville 12 foot non-conductive fiberglass step ladder has a load capacity of 300lbs, rated ANSI Type IA. This ladder is equipped with the new and innovative Raptor Top with magnet and multiple tool slots, SHOX impact absorption system, new Raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces, and double-rivet step construction. The Louisville FS1512 step ladder meets or exceeds the safety standards set by ANSI and OSHA.
FEATURES
Shox Impact Absorption System
Multifunctional Raptor Top With Multiple Tool Slots And Magnet
Raptor Boot With Slip-resistant Non-Marring Bonded Tread
Inside Spreader Braces
Double-Rivet Step Construction
Wide Back Braces
This Louisville 20 foot aluminum extension ladder has a 200 pound load capacity, rated ANSI Type III. This ladder is equipped with D-shape rungs fully serrated for a slip resistant surface, aluminum runglock, mar resistant rail end caps, rope and pulley, and slip-resistant rubber feet. The Louisville L-2324-20 aluminum extension ladder meets or exceeds the safety standards set by ANSI and OSHA.
FEATURES
D-Shaped Rungs
Mar-Resistant Rail End Caps
Slip-Resistant Rubber Feet
Aluminum Runglock
Rope And Pulley Included
This Louisville 10 foot non-conductive fiberglass step ladder has a load capacity of 300lbs, rated ANSI Type IA. This ladder is equipped with the new and innovative Raptor Top with magnet and multiple tool slots, SHOX impact absorption system, new Raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces, and double-rivet step construction. The Louisville FS1510 step ladder meets or exceeds the safety standards set by ANSI and OSHA.
FEATURES
Shox Impact Absorption System
Multifunctional Raptor Top With Multiple Tool Slots And Magnet
Raptor Boot With Slip-resistant Non-Marring Bonded Tread
Inside Spreader Braces
Double-Rivet Step Construction
Wide Back Braces
The 368 Aluminum 8ft Step Ladder has a duty rating of 250lb and Tool-Tra-Top™ that feature a convenient tray for holding tools or a paint can and slots for a paint roller tray. There is also a sturdy molded paint can hanger on the back of the top. The automatic Spill-Proof® pail shelf opens and closes with the ladder. The Traction-Tred® steps are slip resistant.
Tool-Tra-Top™ convenient tray for tools/paint can and slots for paint roller tray
Automatic Spill-Proof® Pail shelf that opens and closes with ladder
Sturdy molded paint can hanger on back of top
External Pinch-Proof™ spreaders
Slip-resistant Traction-Tred® steps
Top step and bottom three steps braced
Slip-resistant molded foot pad
The Bil-Jax EZ-RAX Scaffold Transport System is designed for use with our popular 5' x 7' rolling tower scaffold.
Holds every part and component of a 20', 15' and 10' high rolling tower scaffold in one integrated racking system
Helps ensure that every part and component is included — and returned when rented
Currently available with or without the Bil-Jax rolling tower
EZ-RAX is the industry’s first and only scaffold transport system. From transport to storage to inventory management, Bil-Jax’s patented engineering solution virtually eliminates all the scaffold rental hassles for both retailers and their customers. Every aspect of the scaffold rental is easier, faster, and more convenient.
The EZ-RAX scaffold trailer is designed for use with our popular 5’ x 7’ high rolling tower scaffold. Every part and component is held within one integrated storage racking system.
Bil-Jax Rolling Tower Packages are manufactured from high strength steel tubing with coped and arc welded perimeter joints on all frames. The rolling towers offer a large work platform with adjustable platform levels and an easy access guard rail system. Standard 7 tube size. All standard components are quick and easy to assemble.
Pedestrian crowd control barriers are ideal for use at many different types of events to protect restricted areas. These heavy-duty steel barricades are more effective than lightweight plastic barricades.
Self-supporting fence sections with removable feet
8' long x 44" high sections constructed of high strength steel
Hot dipped galvanize finish for extreme durability